AV1 generally compresses better than HEVC (H.265), so it can reach similar quality at a lower bitrate, and it is royalty-free. HEVC, however, has wider hardware playback support, especially on older TVs, phones and Apple devices, and it is the established format for HDR and UHD Blu-ray. Choose AV1 for web delivery and modern devices; choose HEVC when you need the broadest compatibility for high-efficiency 10-bit or HDR video.
This guide compares AV1 and HEVC on efficiency, hardware encoding and decoding support, software encoders, browser support, HDR and licensing, then gives practical advice and settings for each.
At a glance
| HEVC / H.265 | AV1 | |
|---|---|---|
| Released | 2013 (ITU-T / ISO) | 2018 (Alliance for Open Media) |
| Compression | Very good | Usually somewhat better at the same quality |
| Licensing | Patent royalties via several pools | Designed to be royalty-free |
| Hardware decoding | Very widespread on devices from the mid-2010s onwards | Common on newer devices; missing on many older ones |
| Hardware encoding | Most GPUs from the last several years | Only recent GPUs |
| Main software encoders | x265 | SVT-AV1, libaom, rav1e |
| Typical containers | MP4, MKV, MOV, MPEG-TS | MP4, MKV, WebM |
Compression efficiency
AV1 builds on the ideas in VP9 and HEVC with more block partition shapes, more prediction modes, film grain synthesis and improved filtering. In independent tests, a good AV1 encode usually needs less bitrate than HEVC for the same perceived quality, but the size of the gap depends heavily on the encoders, presets, content and quality metric. Treat broad claims such as "30% smaller" as rough indications rather than guarantees.
AV1's film grain synthesis deserves a mention. Grainy footage is expensive to encode accurately, so AV1 can strip the grain, encode the clean picture and send parameters that let the decoder add similar grain back. This can save a lot of bitrate on grainy film sources, though the restored grain is a statistical imitation rather than the original.
The best way to see the difference for your own footage is to encode a short clip with both and compare file sizes and VMAF scores.
Encoding speed and encoders
For software encoding, the main choices are:
- x265 for HEVC: mature, well understood, with presets from ultrafast to placebo.
- SVT-AV1 for AV1: the most practical AV1 software encoder for most people, with numbered presets where lower numbers are slower and more efficient and 13 is the fastest. At its middle presets it is broadly competitive with x265 in speed while usually compressing better.
- libaom: the reference AV1 encoder. It can produce excellent quality but is generally much slower.
Hardware encoding is where the generations show. HEVC hardware encoding is available on most NVIDIA, Intel and AMD GPUs from the last several years. AV1 hardware encoding needs newer hardware:
- NVIDIA: GeForce RTX 40 series and later.
- Intel: Arc discrete GPUs and Core Ultra processors with Arc integrated graphics.
- AMD: Radeon RX 7000 series and later.
For more on how these encoders compare, see GPU video encoding on NVIDIA, Intel and AMD.
Playback compatibility
Smooth playback of high-resolution video usually relies on hardware decoding, and that is HEVC's biggest advantage.
- Windows PCs: AV1 hardware decoding is available on NVIDIA RTX 30 series and later, Intel 11th-generation Core and later, and AMD RX 6000 series (most models) and later. Windows apps use the free AV1 Video Extension from the Microsoft Store. HEVC is supported on far more GPUs but needs the HEVC Video Extensions for playback in Windows' own apps.
- Browsers: Chrome, Edge and Firefox all support AV1, using software decoding if there is no hardware decoder. Safari supports AV1 only on Apple devices with hardware AV1 decoding (such as iPhone 15 Pro and later and Macs with M3 chips or newer). Safari has supported HEVC for much longer.
- TVs, phones and streaming devices: many recent models decode AV1, and major streaming services use it where available. Older devices, including many from before roughly 2020, often decode HEVC but not AV1.
If a device lacks hardware AV1 decoding, software decoding may still work for 1080p on a capable CPU, but 4K can stutter and drain laptop batteries.
HDR and 10-bit
Both codecs support 10-bit video and HDR (HDR10 and HLG). HEVC is still the default for HDR in physical media and much consumer hardware, and Dolby Vision is most widely supported with HEVC. AV1 handles HDR well and is used for HDR streaming, but device support for AV1 HDR playback is less consistent. If you are archiving HDR material or sending it to a TV, HEVC is the safer choice today.
Licensing
HEVC is covered by patents managed by multiple pools and individual companies, which slowed its adoption in browsers and open-source software. AV1 was created by the Alliance for Open Media - whose members include Google, Microsoft, Netflix, Amazon, Apple, Mozilla and others - specifically to be royalty-free. For individuals encoding their own videos, licensing is mostly invisible, but it explains why AV1 has strong support in browsers and on the web.
Which should you choose?
- Choose AV1 for web video, files you will play in modern browsers, uploads where you control the encode, and a personal library played on recent hardware.
- Choose HEVC for HDR delivery to TVs, playback on older smart TVs, phones and set-top boxes, and when you need hardware encoding on a GPU older than the AV1 generation.
- Choose H.264 when universal compatibility matters more than file size - see H.264 vs H.265.
Example settings
A balanced SVT-AV1 encode in FFmpeg (lower CRF means higher quality; the scale runs from 0 to 63):
ffmpeg -i input.mp4 -c:v libsvtav1 -crf 30 -preset 6 -c:a libopus -b:a 128k output.mkv
A comparable x265 encode, using 10-bit to reduce banding:
ffmpeg -i input.mp4 -c:v libx265 -crf 22 -preset slow -pix_fmt yuv420p10le -c:a copy output.mkv
These are starting points, not fixed rules. Our guide to compressing video without losing quality explains how to tune them, and MKV vs MP4 helps you pick the container.
Doing it with Movie Encoder
Movie Encoder encodes both HEVC (x265) and AV1 (SVT-AV1 or other available encoders), as well as hardware HEVC and AV1 on NVIDIA, Intel and AMD GPUs. It detects what your card and drivers can really encode and only offers hardware AV1 when it is supported, with a configurable fallback to the CPU.
The Quality Lab lets you run real test encodes of the same sample in both codecs and compare VMAF, SSIM, PSNR, file size and encoding time with a side-by-side A/B view, so you can decide on evidence from your own footage.
Frequently asked questions
Is AV1 better than HEVC?
AV1 usually compresses somewhat better and is royalty-free, but HEVC plays on more existing devices. The better choice depends on where the video will be watched.
Which GPUs can encode AV1?
NVIDIA GeForce RTX 40 series and later, Intel Arc GPUs and Core Ultra processors with Arc graphics, and AMD Radeon RX 7000 series and later.
Can Windows play AV1 files?
Yes, with the free AV1 Video Extension from the Microsoft Store, and smoothly when the GPU has hardware AV1 decoding. VLC and modern browsers also play AV1.
