Welcome to Movie Encoder
Movie Encoder converts, compresses and encodes video on Windows. It opens almost any video file, encodes it to the format you need - on your processor or your graphics card - and checks the result before saving it.
What Movie Encoder does
- Converts and compresses. H.264, HEVC, AV1, VP9, ProRes, DNxHR, FFV1 and more, in MP4, MKV, MOV, WebM, MPEG-TS or MXF.
- Uses your graphics card. NVIDIA NVENC, Intel Quick Sync and AMD hardware encoders, when your PC supports them.
- Handles lots of files. A batch queue that's saved between sessions, and watch folders that encode new files automatically.
- Takes the guesswork out. The Smart Encoding Advisor recommends settings for your goal, and the Quality Lab measures the result with PSNR, SSIM and VMAF.
- Goes further when you need it. Multi-Output jobs, a visual Workflow Builder, RAW video import and Archive & Verify with SHA-256 checksums.
- Protects your originals. Source files are never overwritten or deleted.
Movie Encoder is built on FFmpeg, the encoding engine used by many video tools. It checks which codecs, filters and hardware encoders your copy supports and only offers settings that will work.
System requirements
| Item | Requirement |
|---|---|
| Windows | Windows 10 or Windows 11, 64-bit. |
| Processor and memory | Any modern 64-bit PC. Encoding is demanding: a faster processor, more memory and a supported graphics card all make encodes quicker, especially for 4K video. |
| Graphics card (optional) | For hardware encoding: an NVIDIA card with NVENC, an Intel processor or graphics with Quick Sync, or an AMD card with a hardware encoder, with up-to-date drivers. Which codecs can be encoded depends on the card's generation. |
| Disk space | Room for your outputs plus temporary files while encoding. Lossless and intermediate formats such as FFV1, ProRes and DNxHR create much larger files than H.264 or HEVC. |
| Internet connection | Needed to activate your Installation Key and check for updates. Encoding never uses the internet. |
Installation
- Download the installer from your download page and run it.
- If Windows shows "Windows protected your PC", click More info and then Run anyway. Windows can show this for software it hasn't seen many times before.
- Choose where to install and whether you want a desktop shortcut, then click Install.
- Click Finish. Movie Encoder can start straight away and appears in the Start menu.
Movie Encoder doesn't need Python or any other software installed separately. Upgrading is the same: run the newer installer over the top, and your settings, presets and queue are kept.
The main window
Movie Encoder has a dark, professional layout with navigation down the side. The main sections are:
| Section | What it's for |
|---|---|
| Dashboard | An overview: recent jobs, the queue and your hardware at a glance. |
| Media Library | The files you've imported, with their media information. |
| Encode | The main workspace for encoding a file (see below). |
| Batch Queue | Every queued, running, finished and failed job. |
| Presets | The preset library, plus your own presets. |
| Quality Lab | Test encodes and quality measurements. |
| Smart Advisor | Recommended settings for your goal. |
| Workflow Builder | Visual, node-based processing pipelines. |
| Multi-Output | Many outputs from one source. |
| RAW Video Tools | The RAW Video Import Wizard. |
| Archive & Verify | Checksums, verification and preservation reports. |
| Watch Folders | Automatic encoding of new files. |
| Performance Monitor | CPU, memory, GPU and disk use while encoding. |
| History & Logs | Past jobs, their commands and logs. |
| Settings | All program settings. |
The Encode workspace
- Left: the source file, its media details, encoding profiles and quick presets.
- Centre: a large preview with a timeline, crop and trim tools and a before/after view.
- Right: output settings - video, audio, subtitles, filters, hardware acceleration and advanced options.
- Bottom: the current encode's progress, the queue, speed, time left and any messages.
A light theme is available in Settings, and the layout is remembered between sessions.
Beginner, Standard & Expert modes
Choose how much you want to see. All three modes use the same encoder underneath, so switching never changes the quality of your encodes.
| Mode | What you see |
|---|---|
| Beginner | Pick a preset or goal, choose where to save, and encode. Advanced settings are tucked away. |
| Standard | The common settings: codec, container, quality, resolution, frame rate, audio and subtitles. |
| Expert | Every encoder setting, the generated filter graph and the exact FFmpeg command. |
Importing media
Drag files or whole folders onto Movie Encoder, or use the import button. Folders can be scanned including their sub-folders.
Movie Encoder opens the formats your copy of FFmpeg supports, including MP4, MOV, MKV, AVI, WMV, WebM, FLV, MPEG, MPEG-TS, M2TS, MTS, VOB, MXF, ASF, OGV, 3GP and DV. For each file it shows:
- File name, full path, container, size and duration.
- Resolution, frame rate, codec, bit depth and chroma subsampling.
- Colour information and HDR details where present.
- Every audio, subtitle and attachment stream, chapters, bitrates and metadata.
Headerless raw video (for example a .yuv file) has no information inside it to read - open it with the RAW Video Import Wizard instead.
Your first encode
- Import a video. Its details appear on the left.
- Choose an output. Pick a preset (for example Balanced H.264 or YouTube 1080p), or choose a codec such as H.264 and a container such as MP4 yourself.
- Set the quality. The preset sets a sensible quality level; you can change it under the video settings.
- Choose where to save. Movie Encoder suggests a name that won't overwrite anything.
- Click Encode. Progress shows the percentage, frames, encoding speed, output size and time left.
- Open the result when it's finished, or read the log if something went wrong.
You can cancel at any time. A cancelled or failed encode is never saved as if it were complete, and your source file is never touched.
Codecs & containers
| Codec | Typical use |
|---|---|
| H.264 | Plays almost everywhere. A safe choice for sharing, the web and older devices. |
| H.265 / HEVC | Similar quality to H.264 at a noticeably smaller size; widely supported on modern devices. |
| AV1 | Very efficient, royalty-free; slower to encode on a CPU and needs recent hardware to decode smoothly. |
| VP8 / VP9 | Web video, usually in WebM. |
| MPEG-2 / MPEG-4 Part 2 | Older devices and DVD-compatible output. |
| ProRes, DNxHD, DNxHR | Editing intermediates: large files that are easy to edit. |
| FFV1, HuffYUV | Lossless: every pixel kept. FFV1 is popular for archiving. |
| MJPEG, uncompressed | Special workflows that need every frame stored separately or with no compression. |
Containers are MP4, MKV, MOV, AVI, WebM, MPEG-TS and MXF. Not every codec fits every container - Movie Encoder warns you before you choose a combination that won't work.
Remux and stream copy
If you only need a different container (for example MKV to MP4) and the streams are compatible, use stream copy. Nothing is re-encoded, so it's fast and there's no quality loss.
Quality & rate control
| Mode | When to use it |
|---|---|
| CRF / constant quality | The usual choice: you choose a quality level and the file size follows. Lower numbers mean higher quality and bigger files. |
| Hardware CQ | The constant-quality equivalent for GPU encoders. |
| Average bitrate / VBR | When you need a predictable bitrate, for example for streaming. |
| CBR | A constant bitrate, for some broadcast and streaming systems. |
| Two-pass | Analyses the video first, then encodes - the most accurate way to hit a bitrate. |
| Target file size | Enter the size you need; Movie Encoder works out the bitrate. |
Standard and Expert modes also offer maximum bitrate and buffer size, profile and level, encoder preset and tuning, keyframe interval, B-frames, reference frames, pixel format and bit depth, resolution, frame rate, aspect ratio, constant or variable frame rate and HDR metadata. You only see the settings the chosen encoder accepts, each with a short explanation.
GPU encoding
Movie Encoder detects NVIDIA NVENC, Intel Quick Sync and AMD hardware encoders and tests which codecs each one can actually encode on your PC. Only working options are offered - for example, hardware AV1 appears only if your card supports AV1 encoding.
- Automatic picks the best available encoder for the codec you chose.
- Manual lets you choose CPU or a specific GPU encoder.
- Benchmark compares encoders on your PC so you can see the speed difference.
- Fallback decides what happens if a hardware encode fails: stop, or carry on with the CPU.
GPU encoders are much faster; CPU encoders usually give slightly smaller files at the same quality. Try both in the Quality Lab to see what suits your videos.
Preview, trim & crop
- Play, pause, seek and step through frames on the timeline; take screenshots.
- Set in and out points to encode only part of a video, or extract segments.
- Drag the crop box on the preview to remove black bars or reframe.
- Use the split-screen before/after view to see what your filters do.
- Make a short sample encode of a selected section to see the real result when a live preview can't show it exactly.
Filters
Add filters to the filter chain and drag them into the order you want:
- Size and shape: crop, resize, pad, rotate, flip.
- Clean-up: deinterlace, denoise, sharpen, deblock.
- Colour: brightness, contrast, gamma, saturation, colour adjustment, colour-space and pixel format conversion, HDR-to-SDR tone mapping.
- Timing: frame rate conversion, trim, segment extraction, joining videos.
- Overlays: watermarks, text and image overlays, fades, subtitle burn-in.
Expert mode shows the FFmpeg filter graph that your choices create.
Audio
- Encode to AAC, MP3, Opus, Vorbis, FLAC, ALAC, PCM, AC-3, E-AC-3 and other available formats, or copy audio unchanged.
- Keep, remove or reorder tracks, and keep their language and titles.
- Set bitrate, sample rate and channel layout, or downmix surround to stereo.
- Normalise loudness to EBU R128, adjust volume, fade in and out.
- Fix audio that's out of sync with a delay correction.
- Extract the audio on its own, or replace a video's soundtrack.
Subtitles, chapters & metadata
- Keep embedded subtitles, add SRT, ASS/SSA or WebVTT files, or remove tracks.
- Mux subtitles as a selectable track, or burn them in so they're always visible.
- Shift subtitle timing and set the language.
- Keep or remove chapters.
- Edit or strip metadata, track titles, languages and default/forced flags.
If a subtitle format has to be converted to suit the container (for example to MP4), Movie Encoder tells you.
RAW video import
Headerless raw video files contain only pixel data, so you need to tell Movie Encoder how to read them. Open RAW Video Tools and follow the wizard:
- Choose the file.
- Enter the width, height and frame rate.
- Choose the pixel format, for example YUV420P (I420), YV12, NV12, NV21, YUV422P, YUV444P, YUY2, UYVY, RGB24, BGR24, RGBA, BGRA, GRAY8 or a 10 or 12-bit planar format.
- If needed, set the header and frame offsets, colour range, primaries, transfer function, interlacing and aspect ratio.
- Check the expected frame size. If the file size isn't an exact number of frames, you'll get a warning - usually a sign that a setting is wrong.
- Look at the preview frame. Wrong colours or a diagonal, sheared picture mean the pixel format or width needs changing.
- Save your settings as a profile to reuse them, then encode to a normal format.
Y4M files and image sequences are also supported. Camera RAW formats are different from raw video: they're only supported where FFmpeg has a real decoder for them.
Presets
| Category | Presets |
|---|---|
| General | Balanced H.264, High-quality H.264, Compact H.265, High-quality AV1 |
| Hardware | Fast NVIDIA, Fast Intel, AMD accelerated, Hardware HEVC, Hardware AV1 (where supported) |
| Professional | ProRes intermediate, DNxHR intermediate, High-bitrate editing master, Lossless FFV1 archive, Raw uncompressed |
| Delivery | YouTube 1080p, YouTube 4K, Social media vertical, Mobile compatibility, Web streaming, Low-bandwidth |
| Specialist | Animation, Screen capture, HDR preservation, HDR to SDR, DVD-compatible MPEG-2, Audio-only extraction, Archival master |
Create your own presets from any settings, then edit, duplicate, delete, favourite, search and sort them into categories. Presets can be imported and exported to share with others, and Movie Encoder checks each one against your PC before you use it.
Batch queue
- Add single files or whole folders, each job with its own settings and destination, or apply one preset to many jobs.
- Reorder jobs and set priorities.
- Run several jobs at once, within limits that suit your CPU and GPU.
- Pause the queue, cancel or retry jobs, and look at why a job failed.
- Use naming templates for output files; names never clash with existing files, and duplicate sources are flagged.
The queue is saved as you go. If Movie Encoder or Windows closes unexpectedly, the queue is still there next time, and interrupted jobs can be restarted.
Progress shows each job's percentage, the whole queue's percentage, frames processed, encoding fps, speed, elapsed time, output size and encoder. Time left is only shown when it can be worked out reliably.
Smart Encoding Advisor
Not sure which settings to use? Choose a source video and a goal:
| Goal | What it aims for |
|---|---|
| Best quality | The highest practical visual quality. |
| Smallest file | The smallest file within the quality you set. |
| Fastest encode | Speed first. |
| Balanced | A sensible balance of size, quality and speed. |
| Archival | Preservation-friendly formats with metadata kept. |
| Streaming | Widely compatible delivery settings. |
The Advisor looks at the source (codec, resolution, frame rate, bitrate, duration, bit depth, HDR) and your hardware, then recommends a codec, encoder, quality setting, resolution, frame rate, audio and container. Each recommendation comes with the reason for it and an estimated file-size range. Click to apply the settings, then change anything you like.
The Advisor works on your PC with no cloud service. Its size estimates are ranges, not promises - use the Quality Lab to check the result on your own footage.
Quality Lab
- Choose a source and a representative sample (a busy scene is a better test than a static one).
- Add the settings to compare - for example CRF 18, 20, 22, 24 and 26, or H.264 against HEVC, or CPU against GPU.
- Run the test. Movie Encoder makes real test encodes of the sample.
- Compare file size, encoding time and quality scores in the table and charts.
- Look at selected frames side by side or in the A/B view.
- Apply the settings you prefer to your main encode, or export a report.
About the scores
- PSNR measures pixel differences. Simple, but doesn't always match what people see.
- SSIM compares structure and is usually closer to human judgement.
- VMAF was designed to predict how viewers rate quality. It's available when your FFmpeg build includes libvmaf.
Scores are a guide, not the final word. Always look at the frames too, especially dark scenes, gradients and fast motion.
Multi-Output
Make every version you need from one source in one go - for example a 4K HEVC master, a 1080p H.264 file, a 720p AV1 file and an FFV1 archive. Each output has its own codec, container, resolution, bitrate or quality, audio, subtitles, file name, folder and hardware choice.
Save a set of outputs as an output-group preset to reuse it. Each output shows its own progress, and if one fails, the others carry on and finished outputs are kept.
Workflow Builder
Build a processing pipeline by dragging nodes onto the canvas and connecting them:
- Input: video file, raw video, image sequence, batch folder.
- Decode: decoder choice, hardware decode, stream selection.
- Processing: crop, resize, denoise, sharpen, colour convert, tone map, deinterlace, frame rate convert, overlay, watermark, subtitle burn-in, audio normalise, trim.
- Encode: H.264, HEVC, AV1, ProRes, DNxHR, FFV1, raw video and available hardware encoders.
- Output: media file, multiple files, archive output, quality analysis, checksum manifest.
Zoom and pan the canvas, duplicate nodes and edit each node's settings. Movie Encoder checks every connection and shows problems on the node itself. A valid workflow becomes real encoding jobs - split into several steps automatically when needed. Save and load workflows, or start from a template: 4K to 1080p, HDR to SDR, lossless archive, social media exports, audio extraction, multi-resolution delivery or source-to-multiple-codecs comparison.
Archive & Verify
- Create SHA-256 checksums for sources and outputs, and verify files against them later.
- Check outputs: container, expected streams, duration, resolution, frame count where reliable, audio streams and metadata.
- Encode lossless FFV1 archives in Matroska (MKV) with the archival presets.
- Create a preservation manifest with file names, relative paths, sizes, hash algorithm, checksums, codec and stream details, verification time, and the Movie Encoder and FFmpeg versions.
- Export reports as JSON, CSV or plain text, and verify whole batches at once.
What the checks mean. A matching checksum proves a file is byte-for-byte identical - it doesn't compare the picture across two different encodes. Structural checks confirm a file is valid and has the expected streams. Lossless encodes such as FFV1 keep every pixel; lossy encodes are never described as lossless.
Watch folders
- Add a folder to watch (and choose whether to include sub-folders).
- Choose the preset or workflow to use and where outputs go.
- Optionally filter by file extension, set retry rules, choose folders for successful and failed files, and set the hours when encoding may run.
New files are queued automatically once they've finished copying, and the same file is never processed twice. Movie Encoder won't re-process its own output, even if the output folder is inside the watched folder. You can pause automation at any time, read the automation log and get a Windows notification when jobs finish.
Moving or deleting originals after encoding is off unless you switch it on yourself.
Performance monitor
See CPU and memory use, disk free space and activity, GPU and GPU encoder use and GPU memory (where your card reports them), active encodes, each job's fps, output bitrate and throughput, and queue statistics.
In Settings you can limit the number of jobs running at once, the preferred encoder, the thread count, process priority, the temporary folder and the minimum free disk space.
FFmpeg console & logs
- See your FFmpeg version and the encoders, decoders, filters and containers it supports.
- View the exact command generated from your settings, copy it, or export it as a Windows batch file.
- Read the full log of any job, and the commands used by finished jobs in History & Logs.
- Add custom parameters in Expert mode. They're checked, and you're warned when they override other settings.
- Export diagnostic information for support.
Settings
Settings cover: general options, appearance (dark or light), default codecs and output formats, hardware acceleration, file naming, default output folders, temporary files, queue behaviour and concurrent jobs, notifications, automation, performance, privacy, FFmpeg location, updates, logs and advanced options.
Settings can be exported and imported. They're stored in your Windows user profile, so each Windows user has their own. In Privacy you can turn off the recent-files list. Movie Encoder has no telemetry.
How your originals are protected
- Source files are never overwritten or deleted by default, and an output can't be saved over its own source.
- Each encode is written to a temporary file first and only moved to its destination after it finishes and passes a basic check.
- An unfinished or failed encode is never marked as complete.
- Free disk space and folder permissions are checked before encoding starts.
- Temporary files are cleaned up, including after a cancelled job.
- Errors are explained in plain English, with the full log available.
Installation Keys
Your Installation Key is in your purchase email and on your order page. It activates Movie Encoder on your PC.
A key has 16 letters and numbers in four groups: XXXX-XXXX-XXXX-XXXX. Copying and pasting it from your email is the easiest way to enter it.
Lost your Installation Key?
Look up or reissue your key at installationkey.com - it's quicker than contacting support.
Activating Movie Encoder
- Make sure the PC is connected to the internet.
- Open Movie Encoder and choose to enter your Installation Key when asked.
- Paste or type your key and click Activate.
- Movie Encoder contacts the Installation Key server and confirms the activation.
If activation doesn't succeed, the reason from the license server is shown - for example if the key isn't recognised or is already in use on another PC. See Troubleshooting.
Moving to another PC
- Your license covers one PC at a time. To move it, deactivate Movie Encoder on the old PC, then activate it on the new one.
- If the old PC is broken or gone, try activating on the new PC. If the server says the key is already in use, contact support and ask for the activation to be reset.
- To take your presets and settings with you, export them first and import them on the new PC.
Recovering your Installation Key
- Search your email for your Movie Encoder purchase email - try "Movie Encoder" or "Installation Key", and check spam or junk.
- Get your download link again at movieencoder.com/success.php - enter the email you paid with and we'll resend your link and key.
- Use installationkey.com - https://www.installationkey.com/ - to look up or reissue your key.
- Still can't find it? Contact support with the email address you used to buy Movie Encoder.
Updates & uninstalling
Updates are free. Movie Encoder can check the Movie Encoder website for a newer version; to update, download the new installer and run it over the top. Your settings, presets, queue and activation are kept. Nothing is downloaded or installed automatically.
To uninstall, open Windows Settings › Apps, find Movie Encoder and click Uninstall. You'll be asked whether to keep your settings. If you'll use your key on another PC, deactivate first.
Troubleshooting
My Installation Key isn't accepted
Read the message from the license server, then check:
- The key was copied exactly - paste it from your purchase email.
- You're online - activation needs the internet.
- If the key is already in use, deactivate it on the other PC first.
Still stuck? Contact support with the message you see.
I've lost my Installation Key
A file won't open or shows no video
The file may be damaged, incomplete (for example still downloading or copying) or use a codec your FFmpeg build doesn't include. The media information and the log say which. If it's headerless raw video, use the RAW Video Import Wizard.
A codec or container I want isn't offered
Movie Encoder only offers what your FFmpeg build supports and what the chosen container can hold. Check the FFmpeg console for the encoders available, and try a different container - for example MKV accepts more codecs than MP4.
The encode failed
Open the job's log in the Batch Queue or History & Logs. Common causes are not enough disk space, no permission to write to the output folder, a damaged source file, or settings the encoder rejected. Fix the cause and click retry - your source file hasn't been changed.
The output file is bigger than the original
The source may already be highly compressed, or the quality setting is higher than the source needs. Use a higher CRF number (lower quality), a more efficient codec such as HEVC or AV1, or ask the Smart Advisor for Smallest file settings.
The audio is out of sync after encoding
Try keeping the original frame rate (or constant frame rate for variable-frame-rate phone and screen recordings), then use the audio delay correction to shift the audio if needed.
The output won't play on my TV, phone or editor
Choose a compatibility preset such as Mobile compatibility or Balanced H.264 in MP4. Some players don't support HEVC, AV1, 10-bit video or certain audio formats.
GPU encoding isn't offered
Update your graphics driver and restart Movie Encoder. Hardware encoders are only offered once they pass a real test on your PC; some cards can't encode certain codecs (for example AV1) at all.
A hardware encode failed partway
Check the log, update your graphics driver, and lower the number of jobs running at once on the GPU. Set the hardware fallback to continue on the CPU if you'd rather jobs never stop.
My queue disappeared after a crash
The queue is saved as you go, so it should be there when you reopen Movie Encoder. Interrupted jobs are marked so you can restart them.
A watch folder isn't picking up files
Check that automation isn't paused, the file extension is included, the time is within the hours you allowed, and the file has finished copying. The automation log shows what happened to each file.
Still stuck?
We're happy to help. Tell us what you were doing and what the message said.
Frequently asked questions
Will Movie Encoder change or delete my original videos?
No. Originals are never overwritten or deleted, unless you switch on moving originals for a watch folder yourself.
Are my videos uploaded anywhere?
No. Everything is encoded on your PC. The internet is only used for activation and update checks.
Do I need to know FFmpeg?
No. Beginner mode needs only a preset and a destination. Expert mode is there if you want full control.
Which is better, CPU or GPU encoding?
GPU encoding is much faster; CPU encoding usually gives slightly smaller files at the same quality. Compare them on your own footage in the Quality Lab.
Is it a one-time purchase?
Yes - one license, free updates, no subscription.
Contact support
Most questions are answered in Troubleshooting and the FAQ. To contact us, use the support form at www.easiersoftware.com/support. To help us answer quickly, include:
- The email address you used to buy Movie Encoder.
- Your Movie Encoder version and Windows version.
- What you were doing and the exact message you saw.
- For encoding problems, the job's log or the diagnostic information from the FFmpeg console.
Never post your full Installation Key in a public place. Support may ask for it privately to look up your license.
Policies & privacy
Your use of Movie Encoder is covered by the Easier Software License Agreement (EULA). The official policies are on these pages:
What Movie Encoder sends over the internet
Activation and license checks send your Installation Key and an identifier for this PC to the Installation Key license server. Update checks read the latest version number from the Movie Encoder website. Your videos and their metadata are never uploaded, and there is no telemetry.
Nothing matched your search. Try a different word, or ask us.