To convert HDR video to SDR properly, you need tone mapping: a process that compresses HDR's much wider brightness range into the range a standard display can show, and converts the colour from BT.2020 to BT.709. Simply re-encoding or relabelling an HDR file is what produces the familiar washed-out, grey, low-contrast look. In FFmpeg, a common approach chains the zscale and tonemap filters, as shown below.
This guide explains why HDR footage looks wrong on SDR screens, the main tone mapping methods, how to do the conversion with FFmpeg, and how to judge the result.
Why HDR looks washed out on SDR screens
Most consumer HDR video uses one of two transfer functions: PQ (SMPTE ST 2084, used by HDR10, HDR10+ and Dolby Vision) or HLG (Hybrid Log-Gamma, common in broadcast and on some phones and cameras). Both are paired with BT.2020 colour primaries and normally 10-bit encoding. SDR video uses a BT.709 (gamma-style) transfer function with BT.709 primaries, usually 8-bit.
When an HDR file is played on a device or app that ignores the HDR signalling, it interprets PQ values as if they were ordinary gamma values. PQ spreads its code values across a range up to 10,000 nits, so typical scene brightness sits in the middle of the scale - which an SDR player shows as flat and grey. The wide BT.2020 colours also get read as BT.709, so saturation drops. HLG is designed to degrade more gracefully on SDR displays, but colours still look muted without proper conversion.
What tone mapping does
A tone mapping operator decides how to squeeze highlights that might be 1,000 nits or brighter into an SDR target of roughly 100 nits, while keeping mid-tones and skin looking natural. The process has three parts:
- Linearise - undo the PQ or HLG curve so pixel values represent actual light levels.
- Compress the range - apply a curve that rolls off highlights smoothly instead of clipping them.
- Convert colour and re-encode - map BT.2020 primaries to BT.709, apply the BT.709 transfer curve, and output 8-bit (or 10-bit SDR) video.
Common tone mapping operators
| Operator | Character | Typical use |
|---|---|---|
| Hable | Filmic curve, preserves highlight detail, slightly darker overall | Films and high-contrast scenes; a popular default |
| Mobius | Keeps mid-tones close to the original, rolls off only near the top | Content with moderate highlights |
| Reinhard | Simple and smooth, can look a little flat | General use |
| Clip | Hard clipping, no compression | Rarely suitable; blows out highlights |
| BT.2390 | ITU-recommended EETF curve (available in libplacebo) | Accurate, standards-based results |
No operator is correct for every clip. Sports footage, dark dramas and bright landscape footage can each favour a different curve, so testing on a short representative section is worthwhile.
Converting HDR to SDR with FFmpeg
FFmpeg's built-in tonemap filter works on linear light, so it is usually combined with zscale (which requires an FFmpeg build with libzimg; most full Windows builds include it). A widely used one-liner is:
ffmpeg -i input.mkv -vf "zscale=t=linear:npl=100,format=gbrpf32le,zscale=p=bt709,tonemap=tonemap=hable:desat=0,zscale=t=bt709:m=bt709:r=tv,format=yuv420p" -c:v libx264 -crf 18 -c:a copy output.mp4
Reading it left to right: linearise using a nominal peak of 100 nits, switch to a high-precision floating-point format, convert primaries to BT.709, apply the Hable curve with desaturation off, then apply the BT.709 transfer and matrix in limited (TV) range and drop to 8-bit 4:2:0 for encoding. If the result looks too dark, try raising npl; if highlights look oversaturated, try a small desat value such as 0.5.
If your FFmpeg build includes libplacebo, its filter offers more modern operators such as BT.2390 and can run on the GPU through Vulkan, which is considerably faster for 4K material. GPU encoders such as NVENC can then be used for the output encode; see our guide to GPU video encoding on NVIDIA, Intel and AMD.
Practical tips
- Check the source first. Use a media info tool to confirm the transfer (PQ / smpte2084 or HLG / arib-std-b67) and primaries (bt2020). Some phone clips are tagged HLG, some PQ, and they need different handling.
- Test a short segment. Encode 20-30 seconds that includes bright skies, dark shadows and faces before committing to a long encode.
- Compare on the right screen. Judge the SDR output on an SDR display, or with HDR turned off in Windows. An HDR monitor in HDR mode can make SDR look different from how most viewers will see it.
- Strip HDR metadata from the output. If the SDR file still carries HDR tags (mastering display or content light level), some players will treat it as HDR. A properly built tone mapping chain writes BT.709 tags.
- Keep the HDR original. Tone mapping discards information. Keep the master and treat the SDR file as a delivery copy.
Do you need to convert at all?
Not always. Many modern TVs, phones and streaming platforms handle HDR natively, and some (YouTube, for example) generate an SDR version from HDR uploads automatically. Conversion is most useful when you are sending files to people with older devices, editing in an SDR timeline, preparing footage for platforms that mishandle HDR, or making screenshots and thumbnails that look right everywhere.
If you are delivering to YouTube specifically, our guide to the best export settings for YouTube covers both HDR and SDR uploads. If a converted file shows odd colours in one player but not another, the problem may be tagging rather than the pixels themselves - see what to do when a converted video won't play.
Doing it with Movie Encoder
Movie Encoder shows the colour and HDR information of every source in its media info view, so you can confirm whether a file is HDR before you start. Its filters include HDR-to-SDR tone mapping and colour-space conversion, and the before/after split preview and short sample encodes let you check the result on a few seconds of footage before encoding the whole clip.
The Workflow Builder also includes an HDR to SDR template, and because the command preview shows the exact FFmpeg arguments, you can see precisely which filters are being applied. Originals are never overwritten, so your HDR master stays untouched.
Frequently asked questions
Why does my HDR video look grey and washed out?
The player is reading PQ or HLG brightness values and BT.2020 colour as if they were ordinary SDR. Without tone mapping the image looks flat and desaturated.
Which tone mapping method is best?
Hable is a popular starting point because it keeps detail in the highlights, while Mobius keeps mid-tones closer to the original. It depends on the footage, so test a short clip with each.
Can I convert Dolby Vision to SDR the same way?
Most Dolby Vision profiles include an HDR10-compatible base layer that tone maps normally. Profile 5 uses a proprietary colour space and needs a tool that specifically supports it.
