To convert a video format on Windows, open the file in a converter (VLC, HandBrake, FFmpeg or a dedicated encoder), choose the output container and codec you need - usually MP4 with H.264 video and AAC audio for maximum compatibility - and start the encode. If the video and audio inside are already in a compatible codec, you can often just change the container without re-encoding, which is instant and loses no quality.
The rest of this guide explains how to work out what you actually need to convert, the free tools already available on Windows 10 and 11, the settings that matter, and how to check the result before you delete anything.
Step 1: Work out what you are converting from and to
A video file has two layers: the container (the file type, such as MP4, MKV, MOV or AVI) and the codecs inside it (such as H.264, H.265, AV1 or ProRes for video, and AAC, AC-3 or Opus for audio). "Converting a format" can mean changing either layer, and the right approach depends on which one is causing the problem. If you are not sure of the difference, read codec vs container explained first.
Before converting, check what the source contains. On Windows you can right-click the file, choose Properties and look at the Details tab, but it shows limited information. A tool such as MediaInfo, VLC (Tools > Codec Information) or ffprobe -hide_banner input.mov tells you the exact video and audio codecs, resolution, frame rate and bitrate.
Then decide on the target. The most common goals are:
- Play anywhere (phones, TVs, browsers, Windows Media Player): MP4 with H.264 video and AAC audio.
- Smaller files with modern devices: MP4 or MKV with H.265/HEVC or AV1.
- Editing: an intermediate codec such as ProRes or DNxHR in MOV or MXF.
- Web pages: MP4 (H.264) or WebM (VP9 or AV1).
Step 2: Decide whether you need to re-encode
If the codecs inside are already what the target device supports, you only need to remux - copy the streams into a new container. This takes seconds and the picture is bit-for-bit identical. A typical example is an MKV containing H.264 and AAC that you want as an MP4:
ffmpeg -i input.mkv -c copy output.mp4
Remuxing fails when the target container cannot hold one of the streams. MP4, for example, does not accept SRT or ASS subtitle tracks as they are, so you would need to convert or drop them. It also does nothing if the problem is the codec itself - an HEVC file in an MP4 container still will not play on a device without HEVC support.
If the codec has to change, you must re-encode. Re-encoding to a lossy codec always discards some information, so use sensible quality settings and work from the best original you have, rather than converting a file that has already been converted several times.
Step 3: Pick a tool
Windows does not include a general-purpose video converter, but several reliable options are free.
| Tool | Best for | Things to know |
|---|---|---|
| Clipchamp (Windows 11) | Quick edits and simple exports | It is an editor rather than a converter, and exports MP4 only. |
| VLC media player | Occasional one-off conversions | Use Media > Convert / Save. Profiles are basic and advanced settings are limited. |
| HandBrake | Free re-encoding with good presets | Outputs MP4, MKV and WebM. It always re-encodes video, so it is not a remuxing tool. |
| FFmpeg | Full control, scripting, remuxing | Command line only. Very powerful, but you need to know the options. |
| Dedicated encoders | Batches, professional codecs, GPU control | Usually a graphical front end for FFmpeg with extra workflow features. |
Step 4: Choose the settings that matter
Most converters bury you in options, but only a few make a real difference.
Video codec and quality
For general use, H.264 is the safe choice. H.265 and AV1 give smaller files at similar quality but need newer hardware to play smoothly - see H.264 vs H.265 for the trade-offs. For quality, use a constant quality mode (called CRF in x264 and x265, or RF in HandBrake) rather than a fixed bitrate unless you need a specific file size. For x264, values around 18 to 23 are a common range; lower numbers mean higher quality and larger files. A typical FFmpeg conversion to a widely compatible MP4 looks like this:
ffmpeg -i input.avi -c:v libx264 -crf 20 -preset medium -c:a aac -b:a 160k output.mp4
Resolution and frame rate
Keep the original resolution and frame rate unless you have a reason to change them. Upscaling adds no detail, and changing the frame rate can cause judder or sync issues if done badly.
Audio
If the audio is already AAC, copy it with -c:a copy instead of re-encoding. Otherwise AAC at 128 to 192 kbps for stereo is fine for most uses.
Hardware encoding
If your PC has a recent NVIDIA, Intel or AMD graphics chip, it can encode H.264 and H.265 on the GPU much faster than the CPU. The trade-off is that GPU encoders usually need a slightly higher bitrate to match the quality of a good software encode at the same size.
Step 5: Check the result
Before deleting the original, check the converted file properly:
- Play it on the device you converted it for, not just on your PC.
- Skip to the middle and the end to make sure the whole file encoded.
- Watch a section with dialogue to confirm audio and video are in sync.
- Compare the duration with the original.
- Check that the audio tracks and subtitles you wanted are present.
Common problems
- The new file will not play: the device probably does not support the codec, profile or pixel format (10-bit H.264 is a frequent culprit). Re-encode to 8-bit H.264 High profile.
- The file is much bigger than the original: your quality setting is too high, or you converted to a less efficient codec. Raise the CRF value or switch codec.
- The picture looks blocky: the bitrate is too low or the CRF value too high. See our guide on how to compress video without losing quality.
- Audio drifts out of sync: often caused by variable frame rate sources such as phone or screen recordings. Converting to a constant frame rate usually fixes it.
Doing it with Movie Encoder
Movie Encoder is a Windows 10/11 app built on FFmpeg that opens MP4, MOV, MKV, AVI, WMV, WebM, MTS, VOB and many other formats, and shows full media info for each file so you can see exactly what you are starting with. You can remux with stream copy when no re-encode is needed, or encode to H.264, H.265, AV1, ProRes, DNxHR and more, and it warns you about codec and container combinations that will not work.
If you are not sure what to choose, the Smart Encoding Advisor analyses the source and your hardware and recommends a codec, quality setting and container with its reasons. Your originals are never overwritten, and an encode is only moved into place once it has finished and passed a check.
Frequently asked questions
Does converting a video reduce its quality?
Re-encoding to a lossy codec always discards some information, although with sensible settings the loss is usually invisible. Remuxing, which only changes the container, does not affect quality at all.
What is the most compatible video format?
MP4 with H.264 video and AAC audio plays on almost every phone, TV, browser and editing program. Use 8-bit H.264 rather than 10-bit for the widest support.
Can I convert a video just by renaming the file extension?
No. Renaming changes only the name, not the file's internal structure, so many players will refuse to open it. Use a tool that remuxes or re-encodes the file properly.
